Geekvape Aegis M100 Mini 2 mod with built-in battery

The Aegis M100’s side lock

The Geekvape Aegis M100, also called the Mini 2, uses a built-in 2500 mAh battery. The mod can deliver up to 100 W and needs a separate atomizer. The A-Lock switch on the side lets you lock the device before putting it away.

Keep the controls within reach

The firing button is above the screen, with the adjustment buttons below. The display lets you check information including the selected wattage and battery level. After changing a coil, check these details and adjust the output to match the installed coil’s instructions.

For transport, engage the side lock and check its status on the screen. This control is separate from the buttons used to change your settings. Make a habit of checking it before slipping the mod into a pocket.

Look after the charging port

The USB-C port is protected by a cover that lifts open. Make sure the port is dry and clean before connecting the cable, then close the cover after charging. The design resists water, dust and shocks, but still needs careful maintenance. Wipe the body clean and avoid unnecessary impacts or exposure to water.